Department is facilitated with 65 computers with design and drawing software required as per curriculum.

AT RVSCET faculties have been using projects as a means of teaching technical skills, tool usage, and problem solving. In the Final Year, Students undertake Project work in different areas of Mechanical Engineering like Design, Thermal, and Manufacturing. The project method provides an excellent means for technological applications. It is a teacher-facilitated collaborative approach in which students acquire and apply knowledge and skills to define and solve realistic problems using a process of extended inquiry. Students follow standards, parameters, and milestones clearly identified by the supervisor during the project. They have control over the planning, refining, and presenting of the project. Through projects, students are engaged in innovation and creativity.

Under the able guidance of qualified and experienced Faculty Members, a group of Students have developed project which are innovative, creative and meets the current demand.

1. “An Approach to Identify Skill Requirement and Develop Required Skills” published in Volume X, Issue No. 9, September 2017 of Industrial Engineering Journal (ISSN 0970-2555).
2. “Establishing Standard Time using MOST” published in Volume IX, Issue No. 4, August 2016 of Industrial Engineering Journal (ISSN 0970-2555).
3. “Productivity Improvement through Lean Manufacturing” – published in Volume VIII, Issue No. 8, August 2015 of Industrial Engineering Journal (ISSN 0970-2555).
4. “Water Jet Machining – An Approach Towards Green Machining” publication in International Conference on “Evaluation in Manufacturing Technology and Business Strategy for Global Competitiveness” at BIT Mesra, Ranchi between 12 and 13 Nov 2016.
5. “Multi Purpose Machine – used by Human Effort” published by Dainik Jagran News paper on 17-09-2016 as one of the best innovative projects
6.  “Gear and Gear Manufacturing” an article published in in-house magazine of RVS College of Engg & Technology, Jamshedpur in 2015
7. A research paper on “Lean Manufacturing” published in in-house magazine of RVS College of Engg & Technology, Jamshedpur in 2014
8. “Optimal Cutting of Leaf Spring” – published in the National Conference proceedings of Operational Research Society of India (ORSI) held at Trivendrum in 1990.

1.  “Investigation of parameters affecting exergy and emission performance of basic and intercooled gas turbine cycles” Energy, Volume90, Part 1, October 2015, Pages 525–536, doi: 10.1016/j.energy.2015.07.084
2. Anupam Kumari, Sanjay, “Thermo-environmental Analysis of Recuperated Gas Turbine-Based Cogeneration Power Plant Cycle” Arab J Sci Eng, feb (2016) 41:691–709, doi:10.1007/s13369-015-1835-2.
3. Kumari, A., Choudhary, T., Sanjay, Y., Murty, P. et al. “Thermodynamic and emission analysis of basic and intercooled gas turbine cycles” SAE Technical Paper 2015-01-2426, 2015, doi:10.4271/2015-01-2426.
4. S. NIT, Kumari, A., Sahu, M. Kumar, and Nitin Kumar, “Energy and Exergy Analysis of Complex Intercooled-Recuperated Gas Turbine based Power Plant with Cooled Turbine Blades”, ISST Journal Mechanical Engineering, vol. 5, pp. 49-57.
5. Sahu, M., Choudhary, T., Kumari, A., and R, S., "Thermoeconomic, Sustainability and Environmental Damage Cost Analysis of Air Cooled CT7-7A Turboprop Engine," SAE Technical Paper 2018-01-0774, 2018, https://doi.org/10.4271/2018-01-0774.
6. Kumari, A., Sahu, M., R, S., Choudhary, T. et al., "Exergy and Emission Analysis of Evaporative Inlet Air-Cooled Gas Turbine Cycle," SAE Technical Paper 2018-01-1271, 2018, https://doi.org/10.4271/2018-01-1271.
7. Choudhary, T.,Kumari, A. et al., "Thermodynamic Modeling of Blade Cooled Turboprop Engine Integrated to Solid Oxide Fuel Cell: A Concept," SAE Technical Paper 2018-01-1308, 2018, https://doi.org/10.4271/2018-01-1308.
8. Mohapatra, A., Kumari, A. et al., "Thermodynamic Analysis of an Evaporative Inlet Air Cooled Combined Cycle for Marine Application," SAE Technical Paper 2018-01-1777, 2018,
9. Kumari, A., Mishra, S., Mohapatra, A.K., and Sanjay, S., “Energy, Exergy and Emission Performance Analysis of Air-Film Blade Cooled Turbo Prop Turbine for Heavy Duty Cargo Aircrafts,” SAE Technical Paper 2019-01-1389, 2019, doi:10.4271/2019-01-1389.

1. Comparisons of Performance Of Solar Air Heater With Different Obstacle In The Air Flow Path: A Review, IJMPE,  Volume VI, Special Issue, 2016, ISSN 2349-3534

1. Indian Power Scenario With A Thrust On Non-Conventional Energy Resources
2. Review Of Ocean Energy And It’s Prospective In India And Across The Globe

1. Exergy Analysis of a Complex Rankine Cycle Coal – Fired Power Plant IJERMS ISSN 2394-7659

1. Buckling Analysis of Isotropic Skew Plate, 4(5), 01-07, IIJME, ISSN 2321-6441.
2. Vibration of angle-ply Skew Plate using RBF base Meshless Method 4(4), 08-15, IIJME, ISSN 2321-64413.
3. Free Vibration Analysis of Skew Plate using Meshfree Method, 6(3), 140-145,I JREAS, ISSN 2249-3905.
4. Meshless Analysis of Orthotropic Skew Plate under Sinusoidal Line Load, 3(3); 113-117, IARJSET, ISSN 2393-8021.
5. Analysis of Orthotropic Skew Plate using FSDT and RBF Collocations,4(1); 438-442, IJSRD, ISSN 2321-0613.
6. Flexure Analysis of Isotropic Skew Plate using Meshfree Method, 2016, 2(9): 115 119, IJIRST, ISSN 2349-6010.

1.  A Review: Progress of Solar Photovoltaic Energy in India.

1. Waste Heat Recovery an Ultimate Source of Energy (A Review).

1. Performance Analysis of Mixtures of R290 and R600a With Respect To R134a in Simple Vapour Compression Refrigeration System IJIRSET 2319-8753.